Skip to main content

HUGE (very large) Letters in foam



Big foam letters can make a wonderful impression during a special event, in decorating a retail area, or for super cool photo shoots. The letters are custom cut in high density polystyrene letters. These very large foam letters are relatively lightweight and have moisture and mildew resistant properties, even when unpainted.
The VLL's (Very Large Letters) are perfect for exhibits, events, trade shows, stage, weddings, anniversaries, gatherings and many other uses, and can be finished further with a painted color, a flattened bottom for standing and special thicknesses up to 30" thick.

You may finish the letters yourself with an acrylic paint. Some solvents found in spray paint and hard-coated enamel paints will dissolve the foam material. You may also order the large foam letters pre-painted. If you order painted letters, we will "face" the letter with a thin piece of MDF wood for a smoother finish. The sides will still have the typical foam "orange peel" marks. Painted letters have an unpainted back unless you upgrade to the standing flat bottom option.

Perfect for outdoor use for an event, as a showcase and more. We also make durable letters for permanent installations and 3D Dimensional Carved Signs.
 For stage, fashion and promotions, sales and events, these cost-effective VLL's (Very Large Letters) are perfect and reasonably priced.

 Need smaller letters from 1" to 6"?
We make them too. Use the link near the bottom of the page.
With the Standing Flat Bottom option, each letter will have a flat bottom in order to allow them to stand. This may reduce your letter height slightly depending on the font selected. Some letters, such as J, P and F, may need additional support to stand. This can be done by applying double sided mounting tape to the bottom of the letter, attaching it to a base, leaning it on an adjacent letter, creating a custom base for the letter or placing it up against a wall.
Thicker letters will have an easier time standing. For help making your selection contact us.





How big is a letter?

Letter sizing is somewhat complicated. In many fonts, different letters have different heights, especially lowercase letters in relation to their capitals.
We size everything proportionally to an uppercase “A”. 
Because of this, some letters may be shorter or taller than the height you select.

Note that we measure the capital "A" height. Some capitals and lowercase letters have larger profiles.
The letters above are both sized to 4 inches. Flat-bottom options change this somewhat. *Font shown is Clarendon Bold.



For a price quote on your project, we are here to help.
Simply tell us the following information:
  • Size of letters in inches
  • Font/typestyle
  • Thickness of letters in inches
  • Exact wording in ALL CAPITALS or Upper and lowercase
  • Any options, like flat bottom, paint color or perhaps "lettering must fit on a 30 foot stage".

You can also send your art or layout here. Be sure ti include your contact information.

Have fun with all the possibilities!









Labels:

Comments

Post a Comment

Popular posts from this blog

How to make a simple Do-It-Yourself foam letter sign

Here are a few easy-to-follow steps for making a foam letter sign. Before you start, here are some basic descriptions to help you plan for what you need. You may want to print this out and save this or forward it to someone looking for guidelines. Contents : What are foam letters? Where can I order foam letters? How can I find the cost? How large do the letters need to be? available space (for your sign) how far does the sign need to be readable? aesthetics What do I need to have to make this turn out well? Using the yardstick Before you glue or cement anything in place You're almost there! What are foam letters? By "foam', I refer to the dimensionally stable extruded plastic "foam", which is cut into letters usually from a 4x8-foot master sheet. The sheets are usually available in 1/2", " and 1-1/2" thickness, so for the sake of this brief article, I'll refer to 1" thick letters when I mention foam letters. Foam let
1 comment
Read more

Concrete letter casting basics

This is a beginner's guide to the basics of casting concrete   For specific details, search online for how to create concrete casting forms. To cast concrete with lettering and a logo if desired, you need a form, concrete and letters. The form can be on a flat surface, into which you can pour your concrete, or the form can be erect with a bottom, sides, a front and a back. Be sure to mix sufficient smooth concrete so that a spill or leak won't scuttle your casting pour. Stir and poke the concrete to reduce incidence of air pockets. For the sake of simplicity, this article focuses on using a flat form or pan for making pavers. After deciding on the form or pan shape and size, follow the basic preparation instructions. I Reverse-cast metal letters with a 7-degree draft for casting f you're casting pavers , especially those with a pattern, design or wording combination, you'll likely want to have a reusable form with multiple-use letters. Letters made to be
3 comments
Read more

Crafts + DIY: How to Cover over Awnings with our DuraStik Self-Adhesive Fabric

Wait, what? Covering over Awnings can be simple Craft ideas below   So what's the scope of this #DIY craft project? We're going to go over how you can cover an awning that may have out-of-date writing on it to update the business name and information. To repair a tear on an awning tent or sail, jacket, canopy or flag, look here. You can cover over old names and information with DuraStik Why would you need to cover an awning? In the "old days", awnings were decorated with a special paint. The paint won't come off, so the best practice is to cover over with more pain- which can look pretty tacky if it's not done right. Modern awnings may be painted or if they're back-lighted, may have an area where light from behind passes thru the letters. This is called an eradicable awning. How can you use DuraStik self-adhesive woven fabrics? • When you're moving into a new store with an awning, • If the information on your awning is out of date, a
3 comments
Read more