Skip to main content

Flags/Banners for City Display and Cross-Street Hanging

What are "City Flags and Banners" about?

You may have seen them- the flags and banners adorning certain cities when you visit; the colorful banners draw attention to the high quality of life and to cultural celebrations and events by adding a splash of color. The banners that cross over the street may also announce an upcoming event or festival.

Here are the different popular kinds available.

The Cross-Street banners typically are suspended from an existing cable suspended far above the
Cross-street banners attach to existing steel cables set up by the city
traffic on busy boulevards. These are generally 3-4 feet tall by 20, 30 or 40 feet wide and contain information about an annual celebration, an upcoming event or even fundraisers. These must meet certain municipal criterion and start at around $700 and up, depending on the size and configuration. Municipal requirements usually include wind slits, extra heavy fabric, extra-strong hemming with nylon webbing (if reusable) and metal D-rings on at least each corner. Price is determined by size, extras (slits, webbing, d-rings, changeable areas for future date changes or locations, and so on). See an example here
Pole Banners come with or
without mounting hardware


Pole banners 
hang from tensioning poles 
mounted at a 90° angle from the vertical poles, one on top and one on the bottom. The banners are made with "pole sleeves" to slide onto the existing poles, and usually also have a grommet (a reinforced hole) near to the vertical pole so that nylon ties can keep it from being blown off by strong gusts. The banners are made to fit existing pole configurations and can be made to almost any height. These are generally fabric printed on one side, or vinyl printed on both sides. See an example here

The prices in the examples linked above for Cross-Street and Pole Banners are for quantities of 1 to 5 alike. This is to give you an idea of what it may cost to reproduce from your artwork in small runs.
Banners greater than 55 square feet (height times width) require wind slits in most municipal areas.


For runs of 6 or more banners alike, we can provide a link to request information on large quantity quotes. You will need the following information:


[1] Finished size of banners,
[2] finishing options required, and
[3] printing one side or two sides,
[4] finished artwork (we can create the necessary kind of art for you for a separate fee).


These beautiful banners and pole flags can add to the beauty of a city event, can tie together a certain look for public spaces and can make a city much more memorable for the celebration of open spaces.

For projects requiring canvas or other materials, and for events with 6 or more banners, drop us a line with your requirements for a fast response.

Related information:
Printed canopies
Sidewalk Decals
Stencils
Outdoor Banner Stands

Comments

Popular posts from this blog

How to make a simple Do-It-Yourself foam letter sign

Here are a few easy-to-follow steps for making a foam letter sign. Before you start, here are some basic descriptions to help you plan for what you need. You may want to print this out and save this or forward it to someone looking for guidelines. Contents : What are foam letters? Where can I order foam letters? How can I find the cost? How large do the letters need to be? available space (for your sign) how far does the sign need to be readable? aesthetics What do I need to have to make this turn out well? Using the yardstick Before you glue or cement anything in place You're almost there! What are foam letters? By "foam', I refer to the dimensionally stable extruded plastic "foam", which is cut into letters usually from a 4x8-foot master sheet. The sheets are usually available in 1/2", " and 1-1/2" thickness, so for the sake of this brief article, I'll refer to 1" thick letters when I mention foam letters. Foam let...

Concrete letter casting basics

This is a beginner's guide to the basics of casting concrete   For specific details, search online for how to create concrete casting forms. To cast concrete with lettering and a logo if desired, you need a form, concrete and letters. The form can be on a flat surface, into which you can pour your concrete, or the form can be erect with a bottom, sides, a front and a back. Be sure to mix sufficient smooth concrete so that a spill or leak won't scuttle your casting pour. Stir and poke the concrete to reduce incidence of air pockets. For the sake of simplicity, this article focuses on using a flat form or pan for making pavers. After deciding on the form or pan shape and size, follow the basic preparation instructions. I Reverse-cast metal letters with a 7-degree draft for casting f you're casting pavers , especially those with a pattern, design or wording combination, you'll likely want to have a reusable form with multiple-use letters. Letters made to be ...

Elevate Your Storefront: A Guide to Awning Graphics for Awnings, Canopies, Flags and Sails.

If you're moving into a store with an awning, congratulations, huge savings will be realized by not having to create or replace an awning. If the awning has wording, or if you want to add wording, branding and graphics, what options are there? When it comes to making a lasting impression on your storefront, few elements are as pivotal as the awning. A well-designed awning not only provides shelter from the elements but also serves as a canvas for showcasing your brand identity. Whether you're looking to refresh your current storefront or embarking on a new venture, selecting the right awning graphics and lettering can significantly enhance your curb appeal. In this guide, we'll delve into the various options available, weighing the pros and cons of each to help you make an informed decision. 1. Painting Over Awning Fabrics: One traditional method for updating storefront awnings is through painting. While this approach offers versatility in design and color choices, it'...